Shopping Cart

0 item(s) in cart/ total: $0    view cart
BFT DEIMOS BT KIT UL/CSA 120V 60HZ 433MHZ 1100 LBS

BFT DEIMOS BT KIT UL/CSA 120V 60HZ 433MHZ 1100 LBS

Your Price:$659.00
Part Number:BFT Deimos 120V 1100 lbs

BFT Model Deimos BT KIT For Residential Applications And Gates Up To 1100 LBS & 75 ft. in length.

Kit Includes

  • Deimos Operator
  • Control Board
  • Receiver
  • 2 Mitto Remote Control
  • Transmitter (2 CH.)
  • Reflective Photocell
  • 5 Racks ( each 39" ) .

GENERAL OUTLINE

The DEIMOS BT UL actuator offers ample installation versatility thanks to its compactness, the extremely low position of its pinion as well as the height and depth adjustments available. The adjustable electronic torque limiter ensures antisquash safety. The emergency manual manoeuvre can be activated very easily by means of a knob.

The end-of-run stop is controlled by electromechanical limit microswitches. The control unit is incorporated. Before each manoeuvre, the control unit performs a check of the operation relays and safety devices (photocells, rubber skirt, etc.). The incorporated control panel checks the drive relays and safety devices (photocells and safety edge) before carrying out any manoeuvre.

SAFETY

  • If correctly installed and used, this automation device satisfies the required safety level standards. However, it is advisable to observe some practical rules in order to avoid accidental problems. Before using the automation device, carefully read the operation instructions and keep them for future reference.
  • Keep children, persons and things outside the automation working area, particularly during operation.
  • Keep radio control or other control devices out of children’s reach, in order to avoid any unintentional automation activation.
  • Do not intentionally oppose the leaf movement.
  • Do not attempt to open the gate by hand, if the actuator has not been released by means of the appropriate release knob.
  • Do not modify the automation components.
  • In case of malfunction, disconnect the power supply, activate the emergency release to gain access to the actuator and request the assistance of a qualified technician (installer).
  • Before proceeding to any external cleaning operation, disconnect the mains powers supply and at least one of the battery pole, if fitted.
  • Keep the photocell optical components and luminous signal indication devices clean.
  • Check that the safety devices (photocells) are not obscured by branches or shrubs.
  • For any direct assistance to the automation system, request the assistance of a qualified technician (installer).
  • Have qualified personnel check the automation system once a year.
  • Entrance is reserved for vehicles, provide a separate entrance for pedestrians.
TECHNICAL FEATURES
DEIMOS BT
Control panelQSC D UL (incorporated)
Reversible/irreversible operatorirreversible
Power supply120 V 60 Hz single-phase
Absorbed power0.1 hp (70 W)
Thermal protectionintegrated in the control unit
Leaf speed7.9 ips (12 m/min)
Output rotational speed79 rpm
Pinion pitch4 mm (14 teeth), 18 teeth pinion optional
Impact reactionelectronic torque limiter
Limit switcheselectromechanical
Manual releasemechanical release with knob
Operating cycleintensive use
Environmental conditionsfrom 5°F (-15°C) to 140°F (+60°C)
Degree of protectionIP24
Operator weight16 lbs (~7 kg)
Fuse value (qsc board tansformer)0.63A T
fuse value (QS C board logic unit)2A T