CarSense 202 Slim Outdoor Buried Driveway Alert Sensor
The CS202 is a compact, single-piece, vehicle motion detector that operates by detecting changes in the earth s magnetic field that occur near the probe. These changes are produced by the movement of ferrous materials such as cars or trucks within the probe s range. The CS202 is a direct burial probe placed adjacent to a roadway or buried in a concrete or asphalt roadway.
The probe features a 12ft. detection range that is dependent on the speed and size of the vehicle. The probe is available in a wide variety of cable lengths. The CS202 output consists of a set of form C relay contacts (N.O, N.C., C).
The CS202 may be used as a free exit sensor in both commercial and residential applications. The detector
is not for use as a presence detector. When presence detection is needed, use the Ultra II DTEK and
inductive loop.
Specifications:
Range sensitivity 12 ft. @ 5mph min. speed Output on time 0.5 6 seconds Surge protection Probe circuitry protected by surge suppressors Relay output configuration - 5-wire Form C (SPDT) Relay contact rating 1A @ 24VDC, 1A @ 120VAC Power 9 41VDC or 6 29VAC Standby current 0.250mA Detection current 12mA Operating temperature -40°C 82°C (-40°F 180°F) 0 95% relative humidity Probe housing material PVC water-tight Probe dimensions (L x Dia.) 24 (610mm) x 1 (25mm) Probe cable 3-wire and 5-wire, direct burial
Manual Spec Sheet