BFT Virgo BT Column Mount Swing Gate Operator Double Kit Handles Gates 440LBS
Kit Includes
- 2 Operators
- 1 Receiver
- 2 Remote Controls
- Reflective Safety Eye
GENERAL OUTLINE
This controller is suitable for residential use and has been designed for swing gates with particularly large gate posts. The drive arm, built with a special anti-shearing shape, allows the leaves to be moved when the controller is considerably out of place with respect to the fulcrum of the leaves. The non-reversible electro-mechanical gearmotor maintains the stop during closing and opening. The release lever, fitted in each controller and situated inside the door fitted with personalised key, allows the manual manoeuvre to be easily carried out
VIRGO:Provides an in dispersible automation system for swing gates installed on particularly large pillars. The drive arm with its special anti-shearing shape allows the leaves to be moved when the controller is positioned well away from their fulcrum. The irreversible electromechanical reduction gear keeps the gate locked in the closing and opening positions. The emergency release mechanism is carried out by operating the release lever of each controller, located inside the hatch which is provided with a personalized key. Joint must be combined with a control unit with a torque limiter such as the Aries model control unit. The adjustable limit micro switches and capacitor are connected to the motor.
Electromechanical Operator For Swing Gates
SMART TECHNOLOGY
The large anti-shearing arms allow installation on columns with angles up to 125°.
SAFE USE
- Quick and easy manual release.
- Adjustable limit switches.
- Maximum recommended offset 12” (could go to 18”).
- 24V DC and 120V AC electromechanical operators for residential use for gate up to 550Lbs and 10Ft.
- Incorporated electrical limit switches.
- Torque limiter from the Rigel 5 control panel.
- Adjustable slow-down on opening and closing.
- Opening up to 125 Degrees in 15 seconds.
| REFERENCE | DESCRIPTION | VOLTAGE | LEAF WEIGHT | LEAF LENGTH |
|---|
| P930116 00001 | VIRGO | 24 V | up to 440 lb (~200 kg) | up to 6’ 6’’ (2 m) |
| P930117 00002 | VIRGO SQ (no control panel) | 24 V | up to 440 lb (~200 kg) | up to 6’ 6’’ (2 m) |
| VIRGO |
| CONTROL PANEL | LINX (incorporated) |
| REVERSIBLE/IRREVERSIBLE OPERATOR | irreversible |
| POWER SUPPLY | 120 V, 60 Hz single-phase |
| ABSORBED POWER | 0.05 hp (40 W) |
| THERMAL PROTECTION | integrated in the control unit |
| OPENING OR CLOSING TIME | 14 s |
| IMPACT REACTION | electronic torque limiter integrated in the control panel |
| LOCK | mechanical on closing and opening |
| MANUAL RELEASE | release lever with key |
| OPERATING CYCLE | intensive use |
| ENVIRONMENTAL CONDITIONS | from 5°f (-15°C) to 140°f (+60°C) |
| DEGREE OF PROTECTION | IP44 |
| OPERATOR WEIGHT | VIRGO 17 lb (~8 kg) - VIRGO SQ 13 lb (~6 kg) |
| DIMENSIONS | see drawing next page |
