CarSense 202 Slim Outdoor Buried Driveway Alert Sensor
The CS202™ is a compact, single-piece, vehicle motion detector that operates by detecting changes in the earth’s magnetic field that occur near the probe. These changes are produced by the movement of ferrous materials such as cars or trucks within the probe’s range. The CS202 is a direct burial probe placed adjacent to a roadway or buried in a concrete or asphalt roadway.
The probe features a 12ft. detection range that is dependent on the speed and size of the vehicle. The probe is available in a wide variety of cable lengths. The CS202 output consists of a set of form C relay contacts (N.O, N.C., C).
The CS202 may be used as a free exit sensor in both commercial and residential applications. The detector
is not for use as a presence detector. When presence detection is needed, use the Ultra II DTEK and
Specifications: Range sensitivity 12 ft. @ 5mph min. speed Output on time 0.5…6 seconds Surge protection Probe circuitry protected by surge suppressors Relay output configuration - 5-wire Form C (SPDT) Relay contact rating 1A @ 24VDC, 1A @ 120VAC Power 9…41VDC or 6…29VAC Standby current 0.250mA Detection current 12mA Operating temperature -40°C…82°C (-40°F…180°F) 0…95% relative humidity Probe housing material PVC water-tight Probe dimensions (L x Dia.) 24” (610mm) x 1” (25mm) Probe cable 3-wire and 5-wire, direct burial
Manual Spec Sheet