FAAC-1042071- 400 CBACR 220V Arm New Manual Release

Safety / Secure Section

Safe and Secure Operation: Equipped with a hydraulic bypass valve for entrapment prevention and a key-protected manual release to enable gate movement in case of power failure. The hydraulic locking mechanism ensures the gate remains securely locked in open or closed positions, eliminating pinch point hazards.

Installation Instructions

1. Mount the arm using the included hardware, ensuring solid alignment with the gate.

2. Integrate wiring into a compatible control panel with proper power and accessory connections.

3. Install mechanical stops at both open and closed positions to prevent overtravel and damage (UL325 compliance).

4. Test manual release with the power off to ensure the key override works correctly.

5. Perform functional testing: cycle the gate multiple times to confirm fast, smooth, and silent operation with proper hydraulic locking.

Recommendations

• UL325 Compliance: To fully meet U.S. safety regulations for gate operators, a monitored safety sensor (e.g., photoelectric cell) is required to prevent accidental entrapment.
  

• Dual Gate Configuration: Pair this arm with an additional operator to convert a single gate into a dual-gate master/slave setup.
  

• Maintenance Tip: Regularly inspect hydraulic fluid and consider using Arctic-grade oil for harsh environments.

• Positive Stops: Essential for protecting both gate and operator longevity.