FAAC-1044682.5 402 CBC 115V UL Standard Basic Single Kit

Safety / Secure Section

Safe and Secure Operation: Equipped with hydraulic bypass for entrapment protection and a manual release mechanism to operate the gate manually in case of power failure. The hydraulic lock secures the gate when closed, offering added stability and reliability

Installation Instructions

1. Mount the enclosure: Secure the 14× 16 fiberglass enclosure on a stable surface.

2. Install the operator: Fix the 402 CBC hydraulic unit to the gate leaf, ensuring proper alignment and secure mounting.

3. Wire the control panel: Connect power (115VAC), receiver, safety devices, and limit switches to the 455D control panel.

4. Install the receiver & remote: Plug in the 433 RC receiver and test the paired XT4 transmitters.

5. Adjust bypass valves: Set force limits per FAAC safety standards—gate must stop if encountering over 33lb (15kg) of obstruction .

6. Set manual release: Ensure the triangular key release works to disengage the hydraulic system for manual gate movement.

7. Test operation: Open and close the gate to verify smooth motion, locking, and correct remote response.

Recommendations

• Always install positive mechanical stops at open and closed positions to protect the operator and gate .

• Consider adding monitored photo-cells (required under UL325 since February 2016) for enhanced safety against obstruction.

• For installations in areas with extreme temperatures, request arctic-grade hydraulic fluid for improved performance.

• Regularly test and adjust bypass valves to maintain safe operating force limits.

• Always follow local electrical codes and UL325 compliance for safety systems.