FAAC-2278 Foundation Plate For 844

Safety Information

• Ensure the concrete pad is cured and level before mounting the plate.

• Use appropriate fasteners (not included) that comply with local building codes.

• Wear protective gear during installation, including gloves and eye protection.

• The plate should only be installed by qualified personnel or under supervision.

Installation Instructions

1. Prepare the Site: Ensure the concrete pad is flat, level, and meets structural requirements.

2. Position the Plate: Place the foundation plate in the correct location relative to the gate’s path.

3. Mark & Drill Holes: Use the plate as a template to mark the anchor bolt holes. Drill accordingly.

4. Secure the Plate: Anchor the plate using appropriate bolts or expansion anchors.

5. Mount the Operator: Attach the FAAC 844 gate operator to the plate using the pre-drilled holes.

Recommendations

• Designed exclusively for use with FAAC 844 gear motors.

• Check the orientation of the plate before anchoring to ensure proper gate direction.

• Combine with FAAC’s OEM hardware and accessories for the best performance.

• Repaint or treat plate edges if exposed to harsh weather to prevent corrosion.

• Use professional installation for best results in commercial settings.