Ram 300 AC Slide Gate Operator Kit with Seco-Larm Safety Photo Cell | Residential & Light Commercial Gate Opener

| Questions about this item? Be the first to ask here.

Your Price: $1,747.00

Part Number:Ramset 300 AC kit1

Reliable Medium-Duty Performance :Designed for residential and light commercial sliding gates up to 700 lbs and 25 feet in length, providing dependable daily operation.
Continuous-Duty AC Motor :Equipped with a ½ HP AC motor that delivers consistent power for medium-duty gates, ensuring smooth start and stop cycles.
Advanced Control Board (Intelligate) :Features microprocessor-based logic with diagnostic LEDs, built-in surge protection, and programmable gate functions.
Manual Release Mechanism Includes an easy-to-access manual release lever to operate the gate during power outages or system maintenance.:Includes an easy-to-access manual release lever to operate the gate during power outages or system maintenance.

Quantity

Description
Customer Reviews
Feature 6

Feature 7

Feature 8

Feature 9

Feature 10

Ramset Ram-300 Swing Gate Operator

This is our best selling swing gate operator, for both residential and commercial applications. The RAM 300 features a powerful 1/2 horsepower, continuous duty motor, able to swing gates up to 18 feet in length and 800 pounds. This efficiently designed and durable system comes equipped with the foot pedal release safety system, for easy manual opening and closing of the gate during power outages and emergencies. It also includes out Whisper Quiet motor operation.

Specifications:

MAXIMUM GATE WEIGHT: 800lbs
MAXIMUM GATE LENGTH: 20 feet
GATE TRAVELING SPEED: Approximately 6.4 inches per second
CYCLES: Continuous
UNIT WEIGHT: 110 pounds
OPERATING TEMPERATURES: -10º to 160º

Features:

Electric Motor: 1/2 horsepower, 120 VAC 4.5 ampere 50 - 60Hertz, continuous duty with high speed ball bearings and resettable overload button
Heavy Duty Worm Gear: Lubricated in an oil bath for smooth and quiet operation.
Limit Switches: Mechanical adjustment for accurate gate stop settings.
Cover: High-impact resistant charcoal grey polyethylene.
Finish: Gold/Zinc plated to inhibit corrosion.
Cover Dimensions: H: 27" L: 16.5" W: 20"

Foot Pedal Release
Emergency Release: This mechanism disengages the gate from the operator to allow easy manual opening and closing of the gate duting power outages and emergencies.

Electronic Features

Intelligate Control Board:

Ramset's "Intelligate" control board works with all of Ramset's slide, swing and overhead vehicular gate operators. It is controlled by a programmable microprocessor that reads and precisely executes all functions of the control board. The control board is powered by a separate mounted 24VAC transformer. This allows no necessary board modifications between 110VAC and 220VAC single-phase applications.

Reprogrammable microprocessor: Allows control boards to be updated.
LED diagnostics: LED (red lights) show the status of the control board at all times.
3-Button station: Easy connection plug (included) for 3-button stations.
Status relays: Triggers relays when the gate is fully open or fully closed.
Plug-in loop detectors: Allows ILD-24 plug-in loop detectors (sold separately) to be used, eliminating messy wire connections.
The control board is powered by a 24VAC transformer that is INCLUDED. This allows no necessary board modifications between 110VAC and 220VAC single-phase applications.

The "Intelligates" functions include:
Automatic close timer: Automatically closes the gate after 0 - 60 seconds after the gate fully opens and all of the safety devices are cleared.
Pre warning: Adds a 3 second delay before the gate moves in any direction. During this 3 second delay the PREWARN relay maintains a closed contact. This allows an alarm or light to be connected to warn when the gate is about to move.
Constant warning: Triggers the PREWARN relay to maintain a closed contact while gate is in motions. This allows an alarm or light to be connected to show when the gate is moving.
Secure close: When power is lost, then regained, the control board checks the status of the gate. If the gate is open and the safety devices are cleared, the gate will automatically close.
Radio cycle: Allows the gate to be stopped at any time with the remote control. Then reverse with another command.
One pass: Closes the gate immediately after the safety devices are cleared. If another car triggers a safety device the gate will stop but not open until a valid open signal is received.
Open & close delay: Adds a 1 second delay before the gate opens and/or closes.
Left or Right: With a flip of a switch, the logic of the control board changes from a left hand operation to a right hand operation.
Master/Slave: Synchronizes two gates to work together in a bi-parting installation.
ERD (Electronic Reversing Devices): Automatically adjusts the sensitivity of the operator to the size of the gate.

Overall Installation Instructions (Summary)

Note: Always refer to the official Ramset 300 AC installation manual for detailed wiring diagrams, safety notes, and compliance requirements.

Step 1 – Site Preparation

Ensure the gate slides freely on its track before installation.
Verify that the concrete pad is level and structurally sound.
Plan electrical conduit routes for power and accessories (photo eyes, loops, receiver).

Step 2 – Mounting the Operator

Position the Ramset 300 AC operator parallel to the gate track.
Align the drive sprocket with the gate’s chain line.
Secure the operator base plate to the concrete pad using anchor bolts.

Step 3 – Chain Installation

Attach the chain to both ends of the gate.
Feed the chain around the drive sprocket, adjusting tension to remove slack (do not overtighten).
Verify gate movement is smooth and balanced.

Step 4 – Electrical Wiring

Connect the AC power source (115V or 230V depending on model) to the operator following NEC and local codes.
Wire the control board, limit switches, and safety devices (photo eyes, loop detectors).
Connect receiver terminals for remotes and optional keypads.

Step 5 – Accessory Integration

Mount photo eyes at the gate entrance and exit at 6” height.
Connect wireless receiver (Linear 109950) and remotes if applicable.
Test safety loops and keypad for proper operation.

Step 6 – Limit Switch Adjustment

Manually move the gate to full open and full close positions.
Adjust open and close limit cams to match desired stopping points.

Step 7 – System Testing

Reconnect power and test gate movement.
Verify soft start/stop, obstacle detection, and manual release operation.
Confirm all safety devices function correctly.

Step 8 – Final Inspection

Tighten all mounting bolts and electrical connections.
Apply lubricant to moving components if required.
Secure the control box cover and ensure weather protection.

Installation Safety Notes

Disconnect power before servicing or wiring.
Only qualified installers should handle electrical connections.
Use UL-listed accessories for compliance with UL325 and ASTM F2200.
Keep pedestrians and vehicles clear during setup and testing.

SPECS
Class	Residential/ Commercial
Max Gate Weight	800 lbs
Max Gate Length	20'
Motor	1/2 Hp, 115 VAC, 4.5 AMPS
Cycles	Continuous
Gate Speed	12" per Second
VAC	115- Single phase
Battery Backup System	-
W x L x H	20" x 16.5" x 27"
Shipping Weight	110 LBS
Emergency Release	Hand Lever