Shopping Cart

0 item(s) in cart/ total: $0    view cart

Ramset 3030 / Ram 3030 3/4hp Swing Gate Operator

Your Price: $3,310.83
Part Number:Ramset-3030-34

Choose Options

Per UL325-2016 all gate operators sold in the USA after February 2016 will be required to have a monitored safety photo cell to prevent accidental crushing or entrapment.

Ramset RAM 3030 1 Hp Swing Gate Operator

This is the biggest and most powerful swing gate opener in its price range. Built to withstand the most punishing and windy environments, the RAM 30-30 features a heavy-duty gauge frame, robust gear system, and a 2 diameter shaft. The RAM 30-30 comes with either a 3/4 or a 1 horsepower, continuous duty motor and will swing gates up to 20 feet long and 3000 pounds. It also includes our Whisper Quiet motor operation.

Ram 30 30 Commercial / Industrial Swing Gate Operator

  • Maximum gate weight: 3000 lbs.
  • Maximum gate length: 20
  • Operating Temperature: -10 to 160 degrees F.
  • Gate Traveling Speed: Approx. 90 degrees in 16 seconds
  • Overall Dimensions: 23 1/2" x 17 1/2" x 27 1/2
  • Chassis: Heavy duty cut & formed by CNC machinery.
  • Cover: High Impact resistant charcoal gray polyethylene.


Electric Motor: 3/4 Horsepower, 115 VAC 8.5 ampere 50 - 60 Hertz with high speed ball bearings and resettable overload button.
Heavy Duty Worm Gear: Lubricated in an oil bath for smooth and quiet operation.
Limit Switches: Mechanical adjustment for accurate gate stop settings.
Cover: High-impact resistant charcoal grey polyethylene.
Finish: Gold/Zinc plated to inhibit corrosion.
Cover Dimensions: H: 27.5" L: 17.5" W: 23.5"

Intelligate Control Board:


Ramset's "Intelligate" control board works with all of Ramset's slide, swing and overhead vehicular gate operators. It is controlled by a programmable microprocessor that reads and precisely executes all functions of the control board. The control board is powered by a separate mounted 24VAC transformer. This allows no necessary board modifications between 110VAC and 220VAC single-phase applications.

    The "Intelligate" features:
  • Reprogrammable microprocessor: Allows control boards to be updated.
  • LED diagnostics: LED (red lights) show the status of the control board at all times.
  • 3-Button station: Easy connection plug (included) for 3-button stations.
  • Status relays: Triggers relays when the gate is fully open or fully closed.
  • Plug-in loop detectors: Allows ILD-24 plug-in loop detectors (sold separately) to be used, eliminating messy wire connections.
  • The control board is powered by a 24VAC transformer that is INCLUDED. This allows no necessary board modifications between 110VAC and 220VAC single-phase applications.
  • The "Intelligates" functions include:

  • Automatic close timer: Automatically closes the gate after 0 - 60 seconds after the gate fully opens and all of the safety devices are cleared.
  • Pre warning: Adds a 3 second delay before the gate moves in any direction. During this 3 second delay the PREWARN relay maintains a closed contact. This allows an alarm or light to be connected to warn when the gate is about to move.
  • Constant warning: Triggers the PREWARN relay to maintain a closed contact while gate is in motions. This allows an alarm or light to be connected to show when the gate is moving.
  • Secure close: When power is lost, then regained, the control board checks the status of the gate. If the gate is open and the safety devices are cleared, the gate will automatically close.
  • Radio cycle: Allows the gate to be stopped at any time with the remote control. Then reverse with another command.
  • One pass: Closes the gate immediately after the safety devices are cleared. If another car triggers a safety device the gate will stop but not open until a valid open signal is received.
  • Open & close delay: Adds a 1 second delay before the gate opens and/or closes.
  • Left or Right: With a flip of a switch, the logic of the control board changes from a left hand operation to a right hand operation.
  • Master/Slave: Synchronizes two gates to work together in a bi-parting installation.
  • ERD (Electronic Reversing Devices): Automatically adjusts the sensitivity of the operator to the size of the gate.


Related Items