Ramset 800-52-00 Chain #40 – 10ft per Box

Instructions

1. Disconnect power to the gate operator before servicing.

2. Remove the old or worn chain from the drive assembly carefully.

3. Measure and cut the Ramset #40 Chain to the required length if needed.

4. Install the chain according to the operator’s mechanical alignment and tension specifications.

5. Ensure all sprockets and gears engage properly with the chain links.

6. Restore power and test the gate for smooth and consistent operation.

7. Periodically inspect chain for wear and proper tension.

Safety / Warning

• Always disconnect power before handling the chain or drive components.

• Wear gloves to protect hands from sharp edges on the chain.

• Do not operate the gate if the chain is damaged or misaligned.

• Ensure proper installation to prevent mechanical failure or injury.

• Inspect regularly for signs of wear or stretching.