Shopping Cart

0 item(s) in cart/ total: $0    view cart

Wireless keypad, miniaturized receiver and 2 transmitters for Gate Opener, Kit

Your Price: $180.00
Part Number:Wireless keypad, miniaturized receiver and 2 transmitters for Gate Opener, Kit

This KIT is easy to use and install, is design for any sliding gate opener system, you can applies this KIT to any operators system like PowerMaster, FAAC, Apollo, Platinum, Ramset, Viking, Doorking, Liftmaster, Elite, BFT and more.

*note: You need to use all the component of this kit to work with your opener system!


The RADIOKEYD-LA is a 4 channel radio keypad. It has 2 operating mode. In those 2 modes, you'll have to register the keypad in a receiver (Like a transmitter programming).


Monocode Mode (by default):

With that mode, the programming will be done directly on the keypad(100 code max) and the transmitted code in the receiver will be always the same (factory serial code).

*You have more information in the instructions


Main Technical Features for Wireless Keypad:

Power Supply: 2 x CR2032

Reception Frequency: 433 MHz

Number of codes memorisable: 100

Number of Channel: 4

Keypad Illumination: Led

Signal Programming: Buzzer

Working Temperature: -20/+60 C

Store Temperature: -30/+80 C

Size/Weight 84 x 75 x 38 mm / 240 g

Protection Rating: IP 54


The receiver (MRMINI1E) integrates the functions of receiver and decoder of standard and rolling Code codes. Its memory is capable of memorizing up to 1000 different codes, both standard and rolling, generated by transmitters of MULTIPASS family


Main Technical Features for Receiver MRMINI1E

1 Channel, 1000 codes memory

40 cm wired output

Power Supply: 12-24V AC (50/60Hz)

Reception Frequency: 433 MHz

Number of codes memorisable: 1000

Number of relay output: 1

Types of output: Monostable, Bistable

Output: Relays NO

Keypad Illumination: LED

Signal Programming: LED rouge/red/rojo

Signal power supply: LED verte/green/verde

Working Temperature: -20/+55 C

Store Temperature: -40/+85 C

Size/Weight 72 x 35 x 21 mm / 40 g


The transmitters (SLIM2E) 2 channels transmit the rolling security code at 433 MHz. The transmitters are equipped with the RPA remote self-learning function. They are powered by one 3V lithium battery (CR2032). To maintain the full working efficiency of the battery, do no expose the product to very cold temperatures or to sources of heat.


Main Technical Features for Remote Control SLIM2E

Rolling Code

Easyroll feature

Sequential numbers


PACKAGE LIST for Wireless Keypad

1 x Wireless Keypad

1 x Allen wrench

1 x Instruction


PACKAGE LIST for MRMINI1E and SLIM2E

1 x miniaturized receiver

2 x transmitters (remote control)

1 x Instruction